Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How can I change the IP address of the SA-100?

    We are changing the entire network IP address scheme for the company and we are not sure how to change the IP Address of the SA-100.

    Thanks in advance

  • #2
    Connect to the SA-100 via the console port on the back of the unit using a terminal emulation program (I prefer TeraTerm) with 19.2 kbps, 8, N, 1, N and a null modem DB-9 serial cable. Make sure you're in the rook directory, type "stcli" and press enter. Follow the prompts to change the IP address.

    Comment


    • #3
      That would be "root" directory...

      Comment


      • #4
        Is there no way to onnect via SSH or through the network?

        Comment


        • #5
          This is the only documented method for manually setting the IP address of the SA-100.

          Comment


          • #6
            I cannto seem to find how to change the IP of the SG-T1K either.

            Where is this stuff documented anyway?

            Comment


            • #7
              The SA-100 Installation documentation can be found on the ShoreTel site in Support under ShoreTel Conferencing & Instant Messaging. To change the IP of the ShoreGear appliances, you can connect using a DB-9 and consoling into the device with a terminal emulation program using the same settings. It can also be done via the HQ server by enabling telnet on the desired switch and gaining telnet access to the switch within 60 seconds of enabling telnet. You can access the Planning and Installation as well as the Administration Guides within the ShoreWare Director.

              Comment


              • #8
                When you try to enable telnet and it asks for the password it is not ShoreTel like it is on all the other switches. I also don't see in the documentation what the correct password is. Another example of ST docs not being that great... Anyone know the password for an SA-100 for telnet?

                Comment


                • #9
                  Do not use Telnet. Use SSH username admin pw ShoreTel. once in type stcli and bingo you can change all the network settings.

                  Comment


                  • #10
                    The only way for the password to be different than ShoreTel would be if someone changed it for all appliances through director, or made edits to the underlying vxworks / linux architecture

                    Comment

                    Working...
                    X