Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DID failing when all settings appear correct

    This past week I ran into a problem that caught me off guard.

    The customer had a T1 circuit with a bank of DID numbers on it. We moved the circuit from their legacy system into the ShoreTel T1 box. The circuit came up but DID was not working. I verified settings - D4, AMI, should be getting 4 digits from telco. When checking system, I kept getting alert 1332 - digits do not match and the call was routed to the backup auto-attendant. When I disabled digit collection, the calls routed to my default auto-attendent menu. After doing a trace on the T1 box it appeared that the telco was not sending us any digits. But it did work when connected to the legacy system. After many phone calls and various departments at the telco, one of the techs discovered that they were sending the digits in pulse form instead of tone form. Once that was changed on the telco end (DTMF) everything starting working as it should.

    Ryland Marshall
    Certified ShoreTel System Engineer

    Any comments that I make are purely my opinion. I am not a ShoreTel employee and do not represent them in any way, other then loving the product. Any advise that I may give is to be used at your own risk, I can not take responsibility for any harm that my come from your decision to use my advise.
    Last edited by Ryland; 07-01-2006, 07:56 AM.
    Ryland Marshall
    Certified ShoreTel System Engineer

    Any comments that I make are purely my opinion. I am not a ShoreTel employee and do not represent them in any way, other then loving the product. Any advise that I may give is to be used at your own risk, I can not take responsibility for any harm that my come from your decision to use my advise.
Working...
X