No announcement yet.
  • Filter
  • Time
  • Show
Clear All
new posts

  • Router to Router VPN

    I have 2 Linksys Routers that I have created a tunnel between - I can ping from both sides of the tunnel - The phone gets an IP address from the remote location and can contact the FTP for cfg files - but it then goes to no service - any help would be apperciated! thanks!

  • #2
    Marcus... Do you have an IP phone address range setup for this remote location? Also, do you have enough IP phone ports checked off on your switch? When I configured a VPN for a ShoreTel phone, the phone hung at requesting service and then went to No Service and subsequently I found that the switches were maxed out for IP phone avaliability. Once I deleted a unused phone, my remote phone was ok.