Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Adding an analog phone to a SG90V

    Greetings,
    I have the phone connected to port 9 of the SG90V, and I made sure that ports 9-12 are not configured as DID trunks. Beyond that I have no idea how to assign an extension to the phone and get dial tone. I have been all through the configuration and do not see any mention of analog anywhere besides the loop start trunk configuration. What am I missing?

    Thanks,
    Jbeaman

  • #2
    You need to go into the switch configuration (under switches section) and make sure the port is not configured for any resource type (ip phones, sip, conference, etc). Once it is available, go to the user extension you want to configure as analog and you'll see the switch port available as a resource type to select.

    Comment


    • #3
      Thank you for the speedy reply. That was exactly what I was looking for. I was over-thinking the problem.

      Comment

      Working...
      X