Tweet
Is there anyway to set the speaker volume of a page in the boot file of the phones? I know when the page is transmitting, the user can turn the speaker volume up and down as desired. We would like to set the default to be at the maximum. Thanks!
-
-
YesOriginally posted by LonnieBear View Post
Although I am not sure if your can do this and allow it to work for Paging, Worth a try though.
Here is the string to out in the custom.txt file
SpeakerLevels TxGain, RxGain1, RxGain2, RxGain3, RxGain4, RxGain5,RxGain6, RxGain7, RxGain8, RxGain9, RxGain10, Speaker DTMF Attenuation, Call Progress Attenuation
These are the default settings (As if you did not put them in the file) the RX gain is what your going to adjust. So effectively RxGain1 = Lowest while RxGain10 = Max. In your situation, your going to want to turn up I would guess RxGain1 - RxGain6 to start with and test. RxGain1 = 258 as default, set this to 774, RxGain2 to 1230 your actually tripling the value for testing. Find the best volume. This document is on line I think.
SpeakerLevels 4096,258,410,649,1029,1631,2584,4096,6492,10289,16 306,13,13
This is the list of Phones and there custom file name
110 110 S0 shore_s0.txt S0custom.txt
210 210 S1 shore_s1.txt s1custom.txt
210A 210 S1A shore_s1a.txt s1custom.txt
530 530 S2 shore_s2.txt s2custom.txt
560 560 S6 shore_s6.txt s6custom.txt
212k 212k S12 Shore_s12.txt S12custom.txt
230 230 230 shore_sev.txt sevcustom.txt
560G 560G S6G shore_s6g.txt s6gcustom.txt -
Wow that's intense! I'll have to get a test phone and spend some time experimenting. Thanks!Comment
-
Remember only this stringOriginally posted by LonnieBear View Post
SpeakerLevels 4096,258,410,649,1029,1631,2584,4096,6492,10289,16 306,13,13
Has to be in proper .txt fileComment
Comment