Trunk group paging

[huffditty]

Here is my scenario, I have a Valcom V-2003A, need to keep the paging scheme the same for the customer. They currently dial an access code of 152, and then select page zone 1 from that. I have a trunk and a trunk group set up for this with a 3 digit access code of 152, the problem lies that the system is waiting for a 7 digit phone number before grabbing the trunk. Is there a work around that anyone knows of to trick the system.

Let me know you thoughts on this.

Thanks to all!!

[huffditty]

Got it, APP Note 109 did the trick, basically you have to use an off system extension, and tweak the Trunk group in the with the support login, by entering in a string to not expect digits, and to assume dial tone.

Have a good one!

[Ian Stewart]

If you ever need to program this option on a phone (or any off system extension for that matter), you can program a Dial Number (Speed Dial) with the External number 152. You'll notice if you try to add 152 under Extension, it won't reconize.

[huffditty]

Ian, thank you, that worked like a champ. I appreciate the input!!!